Printed Inks and Coatings

Henkel Solutions across the Board

Printed Inks and Coatings

Inks and Coatings for printed electronic Applications

Printed electronic technologies lend form, function and flexibility to many of the products consumers rely on daily, including desktop and notebook keyboards, automotive sensors, biosensors and disposable medical tools, touch screens, lighting, household appliances and more. Henkel is a pioneer in the development of specialized and cross-functional ink formulations for printed electronics applications, enabling leading-edge printed electronics for well over three decades. A broad portfolio of silver, carbon, dielectric and clear conductive inks provide superb performance and adaptability for a variety of applications. Inks that address the demands of fine-line printing are integral to the product range, offering functionality for the miniaturized dimensions of modern-day electronics.

Conductive Inks

LOCTITE EDAG PE 007 E&C

  • High-speeed screen and flexo printable
  • Compatible with EDAG silver and carbon inks
  • Meets ANSI/AAMI standards for pregelled ECG disposable electrodes

LOCTITE EDAG PE 007 E&C

  • High-speeed screen and flexo printable
  • Compatible with EDAG silver and carbon inks
  • Meets ANSI/AAMI standards for pregelled ECG disposable electrodes

LOCTITE ECI 1006 E&C (Fine-Line)

  • Halogen-free
  • Excellent fine-line and high resolution printability -- 50?m lines and spaces attainable
  • Excellent adhesion to sputtered ITO and PET good electrical conductivity

LOCTITE ECI 1010 E&C

  • Conductive silver ink that combines excellent conductivity with optimum mechanical strength

LOCTITE ECI 1011 E&C

  • Highest conductive ink based on submicron (fine) silver
  • Silver pigment is (partly) sintering resulting in an optimum conductivity level of approximately 3m?/sq @ 25µm

LOCTITE ECI 5003 E&C

  • Could be a printable flexible alternative for the Indium Tin Oxide (ITO) sputtered substrates

LOCTITE ECI 5005 E&C

  • Improved transparency
  • Could be a flexible printable alternative for the Indium Tin Oxide (ITO) sputtered substrates

LOCTITE EDAG 461SS E&C

  • Halogen free, good adhesion to sputtered ITO films and difficult to adhere to substrates
  • Low temperature cure for sensitive substrates, 20m?/sq @ 25µm, screen printable, Flexible

LOCTITE EDAG 479SS E&C

  • Halogen free and good Flexiblity • 20m?/sq @ 25µm, screen printable,

LOCTITE EDAG 6037E SS & EDAG 6038

  • EDAG 6037 - 10% silver/silver chloride
  • EDAG 6038 - 90% silver/silver chloride

LOCTITE EDAG 7019 E&C

  • Screen printable
  • Excellent adhesion
  • Silver/silver chloride ratio 4:1

LOCTITE EDAG PD 054 E&C

  • UV curable, fast cure and good for solvent and heat sensitive substrates
  • Flexographic and rotogravure printable, 75m?/sq @ 25µm

Blendable Resistive Inks

LOCTITE ECI 7004HR E&C with NCI 7002

  • Consists of a conductive polymer, which changes resistance when force is applied to its surface
  • Blended with NCI 7002 for sheet resistance range of 3K-500K ?/sq/mil

LOCTITE ECI 7004LR E&C with NCI 7002

  • Consists of a conductive polymer, which changes resistance when force is applied to its surface
  • Blended with NCI 7002 for sheet resistance range of 35-35K ?/sq/mil

LOCTITE ECI 8000 Series E&C

  • Resistance increases as temperature increases
  • Self-regulating heater
  • Screen and high-speed printable
  • Offered in 45°C, 65°C, 80°C, 120°C

LOCTITE EDAG PF 407C E&C

  • Screen printable
  • Flexible
  • High conductivity
  • Good for low voltage circuitry
  • 15 ?/sq/mil

Dielectric Inks

LOCTITE EDAG 1020A E&C

  • Screen printable
  • High voltage breakdown
  • Excellent flexibility
  • Moisture resistant
  • Solvent resistant

LOCTITE EDAG 451SS E&C

  • Screen and flexo printable
  • Compatible with EDAG silver and carbon inks
  • Fast cure

LOCTITE EDAG 452SS E&C

  • Excellent flexibility
  • Excellent adhesion
  • Screen printable

LOCTITE EDAG ML25265 E&C

  • Screen printable
  • Translucent
  • Good insulating
  • Fast UV curable
  • Excellent adhesion
  • High peel strength in high temperature and humidity
  • Good with sputtered ITO, glass, polyester film and metals

LOCTITE EDAG PD 038 E&C

  • Screen printable
  • Translucent
  • Fast UV curable
  • Excellent adhesion
  • High peel strength
  • Dot printable at high aspect ratio
  • Good with sputtered ITO, glass, polyester film, and metals

LOCTITE EDAG PF 455B E&C

  • Screen printable
  • Superior humidity resistance
  • Excellent adhesion
  • Optimal for printing cross-over and isolation layers

LOCTITE NCI 9001 E&C

  • Minimal dielectric strength
  • Excellent flexibility
  • Resistant to abrasion
  • Primer coat for difficult-to-adhere-to substrate

Shielding Paints

LOCTITE EDAG 437 E&C

  • Excellent shielding against radiated electromagnetic interference (EMI) and protection against electrostatic discharge (ESD)

LOCTITE EDAG 503 E&C

  • Excellent conductivity
  • Solvent resistant
  • Withstands temperature over 260ºC dip or wave fluxless soldering
  • Flexible over temperature range of -40ºC to >260ºC
  • Good adhesion to a variety of substrates

LOCTITE EDAG 550 E&C

  • Extremely conductive and stable nickel acrylic lacquer coating
  • Provides excellent long-term shielding protection
  • against radiated EMI
  • UL recognized coating
  • Can be overcoatable by decorative top coatings with minimum effect on the shielding properties