Thermally conductive Insulators

SIL-PADS

Thermally conductive Insulators

SIL-PADS: A cleaner, more efficient Alternative for electronic Applications

SIL-PAD materials meet the critical needs of a rapidly changing electronics industry because SIL-PAD thermally conductive insulators, in a variety of ways, continue to be a clean and efficient alternative to mica, ceramics or grease for a wide range of electronic applications. They offer excellent thermal performance, are more durable than Mica, create less mess than grease and are highly cost efficient.

The SIL-PAD Advantage

  • Excellent thermal performance
  • Clean, mess-free alternative to grease
  • Superior durability as compared to mica
  • More cost-effective than ceramic
  • Provides electrical shorting resistance
  • Simplified, clean application
  • Under time and pressure, thermal resistance will decrease
  • Customizable for various applications
  • A specific interfacial performance that matches the need Efficient total applied costs
  • Ideal for modern compact, high heat-generating assemblies

SIL-PAD Highlights

SIL-PAD 1200

  • Thermal impedance: 0.53°C-in2/W (@50 psi)
  • Exceptional thermal performance at lower application pressures
  • Smooth and non-tacky on both sides for easy re-positioning, ease of use and assembly error reduction 
  • Superior breakdown voltage and surface "wet out" values
  • Designed for applications where electrical isolation is critical
  • Excellent cut-through resistance, designed for screw and clip mounted applications
  • Automotive electronics control modules
  • Motor controls
  • Discrete devices
  • Power supplies
  • Audio amplifiers
  • Telecommunications
View Product Details

SIL-PAD

SIL-PAD 400

Learn more about SIL-PAD 400, the original fiberglass-reinforced, siliconebased insulator

  • Thickness (inch) / (mm): 0.007, 0.009 / 0.178, 0.229
  • Dielectric Breakdown Voltage (Vac): 3500, 4500
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD 900S

Learn more about SIL-PAD 900S an high Performance Insulator for Low-Pressure Applications

  • Thickness (inch) / (mm): 0.009 / 0.229
  • Dielectric Breakdown Voltage (Vac): 5500
  • Volume Resistivity (Ohm-meter): 10^10
  • Flame Rating: V-O

SIL-PAD 1100ST (Soft Tack)

Learn more about SIL-PAD 1100ST (Soft Tack) a thermally Conductive, Polyimide Reinforced, Laminate Material-Silicone

  • Thickness (inch) / (mm): 0.012 / 0.305
  • Dielectric Breakdown Voltage (Vac): 5000
  • Volume Resistivity (Ohm-meter): 10^10
  • Flame Rating: V-O

SIL-PAD 1200

Learn more about SIL-PAD 1200 an high-performance, fiberglass-reinforced, silicone-based insulator

  • Thickness (inch) / (mm): 0.009 to 0.016 / 0.229 to 0.406
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^9
  • Flame Rating: V-O

SIL-PAD 2000

Learn more about SIL-PAD 2000 an high-performance, fiberglass-reinforced, silicone-based insulator. Designed for military and aerospace applications

  • Thickness (inch) / (mm): 0.010 - 0.020 / 0.245 - 0.508
  • Dielectric Breakdown Voltage (Vac): 4000
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD 1500ST (Soft Tack)

Learn more about SIL-PAD 1500ST (Soft Tack) a low-pressure, high-performance, siliconebased insulator

  • Thickness (inch) / (mm): 0.008 / 0.203
  • Dielectric Breakdown Voltage (Vac): 3000
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD K-10

Learn more about SIL-PAD K-10 a high-performance, value compound for high-end computer processors

  • Thickness (inch) / (mm): 0.006 / 0.152
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: VTM-O

Q-Pad II

Learn more about Q-Pad II an aluminum-foil substrate, silicone-based grease replacement

  • Thickness (inch) / (mm): 0.006 / 0.152
  • Dielectric Breakdown Voltage (Vac): Non-Insulating
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: V-O

Poly-Pad 1000

Learn more about Poly-Pad 1000 a medium performance polyimide-based insulator

  • Thickness (inch) / (mm): 0.009 / 0.229
  • Dielectric Breakdown Voltage (Vac): 2500
  • Volume Resistivity (Ohm-meter): 10^11

Poly-Pad K-4

Learn more about Poly-Pad K-4 a medium performance polyimide-based insulator

  • Thickness (inch) / (mm): 0.006 / 0.152
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: V-O

Poly-Pad K-10

Learn more about Poly-Pad K-10 a polyester-based, thermally conductive insulation material

  • Thickness (inch) / (mm): 0.006 / 0.152
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: V-O

Q-Pad 3

Learn more about Q-Pad 3 a fiberglass-reinforced, silicone-based grease replacement

  • Dielectric Breakdown Voltage (Vac): Non-Insulating
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: V-O

SIL-PAD Shield

Learn more about SIL-PAD Shield a bonded Laminate of Sil-Pad® with a Copper Shield

  • Thickness (inch) / (mm): 0.019 / ***

SIL-PAD Tube 1000

Learn more about SIL-PAD Tube 1000 a silicone-based, thermally conductive tubes

  • Thickness (inch) / (mm): 0.012 / 0.305
  • Dielectric Breakdown Voltage (Vac): 5000
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD Tube 400

Learn more about SIL-PAD Tube 400 a silicone-based, thermally conductive tubes

  • Thickness (inch) / (mm): 0.012 / 0.305
  • Dielectric Breakdown Voltage (Vac): 5000
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD 800

Learn more about SIL-PAD 800 a thermally conductive, polyimide reinforced, laminate material-silicone

  • Thickness (inch) / (mm): 0.005 / 0.127
  • Dielectric Breakdown Voltage (Vac): 3000
  • Volume Resistivity (Ohm-meter): 10^10
  • Flame Rating: V-O

SIL-PAD 980

Learn more about SIL-PAD 980 a thermally conductive, polyimide reinforced, laminate material-silicone

  • Thickness (inch) / (mm): 0.009 / 0.229
  • Dielectric Breakdown Voltage (Vac): 4000
  • Volume Resistivity (Ohm-meter): 10^10
  • Flame Rating: V-O

SIL-PAD A1500

Learn more about SIL-PAD A1500 a thermally conductive, polyimide reinforced, laminate material-silicone

  • Thickness (inch) / (mm): 0.010 / 0.254
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD A2000

Learn more about SIL-PAD A2000 a medium performance polyimide-based insulator

  • Thickness (inch) / (mm): 0.015 to 0.020 / 0.381 to 0.508
  • Dielectric Breakdown Voltage (Vac): 4000
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

SIL-PAD K-4

Learn more about SIL-PAD K-4 a medium performance polyimide-based insulator

  • Thickness (inch) / (mm): 0.006 / 0.152
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: V-O

SIL-PAD K-6

Learn more about SIL-PAD K-6 a medium performance polyimide-based insulator

  • Thickness (inch) / (mm): 0.006 / 0.152
  • Dielectric Breakdown Voltage (Vac): 6000
  • Volume Resistivity (Ohm-meter): 10^12
  • Flame Rating: VTM-O

Poly-Pad 400

Learn more about Poly-Pad 400 a polyester-based, thermally conductive insulation material

  • Thickness (inch) / (mm): 0.009 / 0.229
  • Dielectric Breakdown Voltage (Vac): 2500
  • Volume Resistivity (Ohm-meter): 10^11
  • Flame Rating: V-O

Typical Properties of SIL-PAD

SIL-PAD High Value Materials

SIL-PAD High Performance Materials

SIL-PAD Polyimide-Based Materials